|
|
This outstanding car alarm is full of potential, able to connect up with and operate a variety of sensors. In addition, the remote control facility (RF) allows the central locking system to be operated together with the alarm.
Features
microprocessor technology
multi-functional remote control operation
audio and visual on/off indicators
multifunction dashboard mounted LED
automatic reset after alarm
adjustable voltage drop (reaction to interior lighting)
voltage drop detection active immediately, or after 5 minutes
direct alarm trigger input (direct alarm after triggering)
warning alarm trigger input (2 triggers within 15 seconds = alarm)
warning input can be switched off with the remote control
adjustable shock detector (can be switched off with the remote control)
detector input for ventilator in order to avoid false alarms
contact switches for bonnet and boot
internal siren for on/off signal and alarm
output for external siren and pager (5A)
alarm time : 30 seconds
starter interrupter for ignition or diesel fuel pump (15A)
special starter motor interrupter relay (30A) supplied
switch on protection if contact is on
output to hazard lights (2 x 6A max.)
output for central locking (100mA)
selectable code for remote control transmitter and receiver (8.748 codes)
an unlimited number of remote control transmitters can be used (K6706B or K6706G)
automatically resets in the event of accidental switch off (60 seconds)
connection for extra starter interrupter via security code lock module (SP150)
diagnosis facility to identify a triggered sensor at a later time
Specifications
supply voltage : 12VDC
consumption : 50mA in standby
temperature range : -40 to +85°C
battery for remote control unit : 12V type V23GA, V23A
recommended housing : G313
in option :
Document of Confirmity
CE_K3511.pdf (21,00 KB)
Manuals
Manual_K3511.pdf (3.713,23 KB)
UserManual_K3511.pdf (355,28 KB)
Hints
Do not mount C16.
|
|
| SITE MAP | |||||||||||||||||||||||
|
|||||||||||||||||||||||