This is the same trainer as the XK-700, except in our molded organizer case. The tools shown with the trainer are the most commonly used in the educational field or you can make your own selection of tools and meter to go with the trainer.

Tools in Case

Model XK-550T (shown in photo) is a stock trainer with tools shown below (meter shown is sold separately).

Elenco Electronics can supply the XK-550 Trainer complete with any combination of tools or any of the meters shown in our catalog. Call or write for more information

Power Supplies

Variable Power Supply +1.25V to 20VDC @ 0.5A (+1.25V to 15VDC @1A) -1.25 to -20VDC @ 0.5A (-1.25 to -15VDC @1A) +12VDC @ 1A -12VDC @ 1A +5VDC @1A +30VAC center-tapped to 15 VAC @ 1A

Analog Section

Function Generator - Sine, Triangular, Square Wave. Frequency adjustable in five ranges from 1 to 100kHz. Fine frequency adjust. Amplitude adjust. DC offset.

Digital Section

Eight data switches. Two no bounce logic switches. Eight LED readouts, buffered Clock frequency 1 to 100kHz. Clock amplitude 5Vpp square wave.

Fast Track Construction

Most of the components are on one PC board, eliminating all wires between the PC board, pots, regulators and switches. Makes assembly easier and faster, eliminates errors. The XK-550-SEMI and XK-700-SEMI kits require a minimum of construction and are fast and easy to assemble. The PC board that is shown above comes fully assembled and tested. Where lab time is limited, the SEMI kit is time and cost effective