Features: 

• Transfer your electronic circuit and wires without re-cutting wires or changing you circuit layout. 

• The MP001 SOLDERBOARD has the exact pattern and spacing as the standard 830 hole connection point solderless circuit board.

• The soldered joints provide a more reliable and long term connection than solderless contacts.

• It has standard 5-hole strip for each IC pin, just like solderless circuit boards.

• It has four buss rails for power or signals.

• It has soldermask for ease in soldering.

• It has mounting holes for mounting inside enclosures.

• Bonus: It can be cut in half for smaller circuits.

The green board is the SOLDERBOARD. The SOLDERBOARD was created to meet the demand to transfer working circuits from the SOLDERLESS CIRCUIT BOARD to a solder circuit board to make a permanent project.

It was designed as an exact duplicate of the SOLDERLESS CIRCUIT BOARD. (white)

You can design or create an electronic circuit on the solderless circuit board #CB222 used in Tronix 2 Digital Lab and then transfer it to the SOLDERBOARD for a permanent product.

The SOLDERBOARD was also designed to be cut in half to be equal to the SOLDERLESS CIRCUIT BOARD #CB111 used in Tronix 1 so you can build any project in Tronix 1 and transfer it to 1/2 of of the SOLDERBOARD.

Here is the link to all the kits of parts you can buy prepackaged with the parts for the experiments and projects in Tronix 1 and 2 Labs. SOLDERBOARD KITS